Autoloading And Autostarting A Cuelist; Automatically Loading The Trackball At Windows Startup; Status Cue Linkcard Setup Dialogue Box - Lightwave Research Status Cue User Manual

Autoloading and Autostarting a CueList

A CueList can automatically be loaded and/or started when Status Cue for Windows is
started. To automatically load a CueList, open a Show and select the desired CueList from
the
At startup, Auto-load CueList
start the selected CueList, click the
the Show is opened, the CueList will automatically open and/or start.

Automatically Loading the Trackball at Windows Startup

The trackball on the Status Cue Console can be used as a mouse for normal Windows
operations. To automatically load the trackball driver when Windows starts up,
complete the following procedure:
1. Select the
brings up the
2. Click the check box beside
3. Click the
line will be written into the
effect the next time Windows is started.
B-14 Status Cue User's Manual
drop-down menu. Refer to Figure B.9. To automatically
icon in the current Status Cue directory program group. This
LinkCard Setup
Status Cue LinkCard Setup
Figure B.10. Status Cue LinkCard Setup Dialogue Box
Load trackball driver at Windows startup
button to accept the changes and dismiss the dialogue box. A
Apply Changes
win.ini
Autostart the above CueList
dialogue box.
file to enable the trackball. The changes will take
check box. The next time
.