Chapter 3 Midi Setup; Overview; Msc Configuration; Midi Show Control Setup - Lightwave Research Status Cue User Manual

Chapter 3
MIDI Setup
In this chapter you will:
configure MIDI Show Control (3-1)
configure MIDI devices (3-2)
remove MIDI devices (3-4)
edit MIDI devices (3-4)

Overview

This chapter covers setup and configuration of MIDI Show Control (MSC),
and MIDI devices. Status Cue can control external MIDI devices and it can be
controlled via MIDI. If you require redundant systems use the information in
this section to setup MIDI communication. Incoming MIDI data can be viewed
for verification. At this time, if your needs do not include MIDI, skip to
"Chapter 4 Fixture Setup."

MSC Configuration

If MSC is required, complete the following procedure to configure MSC:
1. Select
MSC Setup...

MIDI Show Control Setup

from the drop-down menu. This brings up the
Configure
dialogue box. Refer to Figure 3.1.
Figure 3.1. MIDI Show Control Setup
3

Chapter 3 MIDI Setup

3-1