Midi Device Configuration - Lightwave Research Status Cue User Manual

2. Select the appropriate
3. Click the appropriate check boxes to turn on or off the following items:
4. Select the correct driver for your MIDI card from the
5. Click the following boxes in the MIDI In field:
6. Click the following boxes in the MIDI Out (Redundancy:) field:
7. Click the
Note: for complete information on redundant systems, refer to "Redundant System

MIDI Device Configuration

Status Cue can control external MIDI devices with CueLists through the following
protocols:
•
•
•
To configure and control external MIDI devices, complete the following
procedure:
3-2 Status Cue User's Manual
and typing in the ID number. The correct setting is required for redundant
systems and for controlling Status Cue from another MIDI device.
• - if this is the redundant backup system, if you are controlling this
MIDI In
Status Cue via MIDI, or if you would like for MIDI commands to be
captured in a CueList.
• - if this system is the master system, you are planning to output
MIDI Out
MIDI data to external devices.
menu. If you do not have the driver installed for your MIDI card, refer to the
documentation provided with the card to install its driver.
• -if you plan on using an external MIDI device for
Apply to CueLists
CueLists.
• - if you plan on using an external MIDI device to change
Apply to Songs
Songs and play Presets. Otherwise, select
backup system.
• -if this is the master system and you are slaving a
Apply to CueLists
redundant system to control CueLists.
• - if this is the master system and you are slaving a redundant
Apply to Songs
system to control Songs.
• -if you do not have a backup system.
Neither
button to accept changes.
OK
Installation" on page B-1.
Musical Instrument Digital Interface (MIDI)-standard MIDI protocol
MIDI Show Control (MSC)-defined subset of MIDI System Exclusive for
entertainment
System Exclusive protocol (SysEx)-protocol for any device that contains its
own exclusive information from the manufacturer or for the industry type
(MIDI ID) by clicking in its field
Status Cue Device ID
drop-down
Device Driver
if you do not have a
Neither