Playback; Live Control Of A Static Step - Lightwave Research Status Cue User Manual

Playback

Sequences can be played back under live control and by using Presets. Use the
following subsections to playback Sequences.

Live Control of a Static Step

To playback a Step of a Sequence under live control, complete the following
procedure:
6-14 Status Cue User's Manual
1. Recall the Sequence you wish to playback.
2. Using the up and down arrow keys select the desired Step to playback.
Alternately, click the desired Step.
3. Turn Blind Mode off by pressing the <
group. The LED will turn off and the Step is played through the live output
on the Stack. Refer to "Viewing the Output Stack" on page B-9 for
additional information.
> key in the MEMORY
BLIND