Recording The Console's Input And Output Data; Capturing The Active Presets In A Snapshot - Lightwave Research Status Cue User Manual

Recording the Console's Input and Output Data

To record events coming into the Console and the live channel data, complete the
following procedure:
Note: when the record function is used, existing cues are not erased, but they will

Capturing the Active Presets in a Snapshot

The playing Presets can be captured instantly in a snapshot. To capture the Preset
output (snapshot), complete the following procedure:
8-10 Status Cue User's Manual
1. Select a starting point and/or starting time by clicking the desired cue in a
CueList.
2. Press the Record button in the
and the counter will begin if you are using a clock source.
be played.
3. Actions on the Console (turning on or off Presets, loading Songs, etc.) will
be recorded as an individual cue at the time the action occurred.
4. Press the Stop button to stop recording.
1. Select a starting point by clicking the desired cue in a CueList.
2. Press the < > button in the MEMORY group to capture the Console's
CUE
output. The cue will be placed in the CueList. The
new cue will indicate
window. The button will turn red
CueList
.
SNAPSHOT
field of the
Command