Installation And Setup; Unpack Status Cue; Save The Shipping Materials - Lightwave Research Status Cue User Manual

Chapter 1

Installation and Setup

In this chapter you will:

unpack Status Cue (1-1)

set LinkCard address (1-5)
install LinkCard(s) (1-7)
install the Console and accessories (1-11)
connect the cables (1-14)
configure the computer for Status Cue For Windows (1-18)
install Status Cue For Windows (1-22)
configure LinkCard(s) (1-27)
start Status Cue for Windows (1-28)
Unpack Status Cue
In this section you unpack your Status Cue and verify that it arrived complete
and without any damage.

Save the Shipping Materials

Do not discard the shipping cartons and packing materials. These cartons and
packing materials are specifically designed to protect the Console and LinkCard
during transport.
If you ever need to return a product for repair or maintenance, you must return it in
its original shipping carton and packing materials. You will be billed for a new
shipping carton and new packing materials if you return your Status Cue in a non-
factory shipping carton with non-factory packing materials.
Note: before returning anything to the factory, be sure to call your High End
Systems Dealer/Distributor for a Return Authorization number. The factory
cannot accept any goods shipped without an RA number.
Chapter 1 Installation and Setup
1
1-1