Sequences; Creating Sequences; Object Group; Memory Group - Lightwave Research Status Cue User Manual

Creating Sequences

To create a new Sequence, perform the following procedure:
1. Press <
2. Press the <
Note: when transparent values are present, assigned (non-transparent) values from
6-2 Status Cue User's Manual
SEQ > in the OBJECT group, the LED will illuminate. Refer to Figure
6.1. Alternately, you may select
NEW > key in the MEMORY group. Refer to Figure 6.2.
Alternately, select New
( NoName1 ) Sequence window appears listing the fixtures you configured in
Fixture Setup . The new Sequence window contains default transparent values
(indicated by blue). When transparent values are present, values from other
Sequences, Scenes, or Presets will show through and be outputted. Refer to
Figure 6.3.
the last active Scene, Sequence, or Presets will show through and be outputted
to the Stage Value(s). Turn off any active Presets and press the <CLEAR> key
in the SEQUENCE group to clear any hanging values from Scenes and

Sequences.

Figure 6.2. MEMORY Group
Sequence from the
Figure 6.1. OBJECT Group
from the Memory drop-down menu. A new unnamed
Object drop-down menu.