Playback; Automated Playback; Overriding Automatic Playback; Cue Information Box - Lightwave Research Status Cue User Manual

Playback

CueLists can be played back manually, automated through internal time
sources, or externally controlled via MSC. Override control is provided
through the Cue Information box and the Hold function.

Automated Playback

For automated playback of a CueList, complete the following procedure:
Notes: if your clock source other than
8-40 Status Cue User's Manual
1. If the desired CueList is not open, recall (open) it using the procedure
outlined in "Recalling a CueList" on page 8-13.
2. Press the play button on the clock in the CueList to start the CueList.
the CueList. If the play button is not pressed, the CueList will not start.
CueLists can be automatically loaded and started when Status Cue is
started. Refer to "Autoloading and Autostarting a CueList" on page B-14.
(The clock can run without playing (not activated with the play button)
cues.)

Overriding Automatic Playback

Automatic playback can be overridden using either the Hold function or using
the buttons in the Cue Information box. Refer to the following subsections to
override automatic playback.

Cue Information Box

The Cue Information box (Figure 8.78) indicates the current cue, the next
cue, and provides control of the cues.
A
Figure 8.78. Cue Information Box
Refer to Figure 8.78 and the following references for the button functions
of the Cue Information box:
• A- return to first cue
• B- rewind current cue
• C- fast forward current cue
• D- goto last cue
• E- back one cue
, you must press the play button on
No Clock
B C D E F