Getting A Scene Or Sequence Stored As A Preset In A Cue (Get/Get); Song Group - Lightwave Research Status Cue User Manual

Getting a Scene or Sequence Stored as a Preset in a Cue (Get/Get)

Scenes and Sequences stored as Presets in cues can be retrieved and edited on the
fly. This procedure is called Get/Get editing. All selected Presets can be retrieved,
even if they are from different Songs. To perform a Get/Get edit, complete the
following procedure:
1. Select one or more cues that contain Scenes or Sequences stored as Presets.
2. Press the <
GET
second time <
GET
as Preset(s) are placed on the desktop for editing.
3. Perform the desired editing on the Scene(s) or Sequence(s).
4. Press < SET > twice (Set, Set) to place the Scene or Sequence back into its
respective Preset (cues).
> key in the SONG group (Figure 8.77) twice. After the
> is pressed, the selected Scene(s) or Sequence(s) stored
Figure 8.77. SONG Group
8
Chapter 8 CueLists 8-39