Mspeed Wheel - Lightwave Research Status Cue User Manual

To edit the MSpeed construct, complete the following procedure:
1. Select the desired fixture(s). Refer to "Selecting Fixtures" on page 5-5.
2. Using the <
MSPEED
< SPEED > key in the CONSTRUCTS group and press the <
SELECT group to bring up the
Type in the desired value and click the
procedure.
Figure 5.21. Set MSpeed At Dialogue Box
Figure 5.20. MSPEED Wheel
> wheel set the desired value. Alternately, press the
Set MSpeed At
OK
Chapter 5 Scenes, Fixture Groups, and Palettes 5-17
AT > key in the
dialogue box (Figure 5.21).
button to complete the
5