Rate Diagram - Lightwave Research Status Cue User Manual

Rate
Rate overall speed of the entire Sequence, thus the total time each Step of a
Sequence will play before advancing to the next Step. Rate is used as a multiplier.
You can specify rates from
x
effects the Delay value you set in a Scene.
Example 1: with
Example 1: set Xfade to 5 Seconds, Delay to 5 Seconds, and Rate to 1 x on each
5-14 Status Cue User's Manual
speed up time advancement, while greater than
Rate set to
2 seconds. Set Rate to
on. Refer to Figure 5.16.
Step. The resulting Steps will Xfade for 5 seconds and Delay for 5
seconds.
0.01 x (fastest) to 127.98 x
1 x
1 x and Delay set to 2 seconds, Scenes advance every
.5 x and Scenes advance every 1 second, and so
Figure 5.16. Rate Diagram
(slowest). Rates less than
slow down the rate. Rate
1