Transition Time; Select Msc Command Dialogue Box; Edit Time Dialogue Box - Lightwave Research Status Cue User Manual

Transition Time

Transition times can be used with any MSC device to override other timing
entities. To edit transition times, complete the following procedure:
1. Select the MSC cue to edit.
2. Double click the
dialogue box.
3. Select
MSC SET
Figure 8.18. Select MSC Command Dialogue Box
4. Double click the
box. Refer to Figure 8.19.
Figure 8.19. Edit Time Dialogue Box
5. Enter the desired time and click the
field to bring up the
Command
and click . Refer to Figure 8.18.
OK
field. This will bring up the
Trans Time
button to complete the operation.
OK
Select MSC Command
dialogue
Edit Time
Chapter 8 CueLists 8-17
8