Creating Macros; Control Group; Function Group - Lightwave Research Status Cue User Manual

Creating Macros

To create a Macro, complete the following procedure:
Note: pressing the <MACRO> key once places the Console in one-shot mode and
10-2 Status Cue User's Manual
1. Press the < MACRO > key in the FUNCTION group. Refer to Figure 10.1.
Figure 10.1. FUNCTION Group
pressing it twice places it in permanent mode. Refer to "Status Cue Function
Modes" on page 10-8.
2. Press the < > key in the CONTROL group (Figure 10.2). This
STORE
brings up the
Store a Macro
Figure 10.2. CONTROL Group
Figure 10.3. Store a Macro Dialogue Box
dialogue box (Figure 10.3).