Manual Playback - Lightwave Research Status Cue User Manual

Manual Playback

CueLists can be advanced using "go" button playback and with the controls
located in the Cue Information window. To manually advance through a CueList,
complete the following procedure:
Notes: you may also use the buttons in the Cue Information box in the CueList
8-42 Status Cue User's Manual
1. If the desired CueList is not open, press the <
group and then the <
bring up the
Recall CueList
2. Select the CueList to recall.
3. Double click the cue to start.
4. Press the "go" button to advance though cues. You can use the <
key in the CONTROL group, the <
Console's mouse button in the position mode as a "go" button.
window to manipulate cue playback.
> key in the MEMORY group. This will
RECALL
dialogue box.
> key on the keyboard, or the
Enter
CUELIST > in the OBJECT
ENTER
>