Mitsubishi 3000GT Service Manual page 1093

DISASSEMBLY AND REASSEMBLY <REAR SPOILER ASSEMBLY>
Disassembly steps
1. Spacer
2. Bracket
3. Motor and cable assembly
4. Rear spoiler
5. Motor
Standard position of motor
Gear for limi switch
Allen wrench
EXTERIOR - Aero Parts
(1) Make sure that the motor is in the standard position as
shown in the illustration.
(2) If the motor is not in the standard position, use Allen
wrench to turn the gear for the limit switch until the motor
is in the standard position.
TSB Revision
dhesive tape: