REAR AXLE
The differential carrier and axle housing have been
separated from each other, and T.J. and B.J. drive
shafts arranged in between. They drive the axle shafts.
The axle shaft is supported by ball bearings (inner and
outer) in the axle housing and are coupled with the drive
SPECIFICA TIONS
Items
Axle shaft
Type
Shaft dimensions
Outer bearing portion dia.
Inner bearing portion dia.
Center portion dia.
Overall length
Bearing
0.D. x I.D.
Drive shaft
Joint type
Length (joint to joint) x diameter
Differential
Reduction gear type
Reduction ratio
Differential gear type and configuration
Side gear
Pinion gear
Number of teeth
Drive gear
Drive pinion
Side gear
Pinion Gear
Bearing
0.D. x I.D.
Final drive gear backlash adjustment method
Denotes the gear (L.H.) which is in a single body with the viscous coupling.
*.
POWER-TRANSMISSION COMPONENTS -
Outer
Inner
Outer
Inner
Side
Front
Rear
T.J.
Drive shaft
Companion flange
shaft with the companion flange in between.
The front of the differential carrier is supported elastically
on the rear suspension crossmember via the differential
support and the rear side via the differential support
member.
Specifications
Semi-floating type
mm (in.)
35 (1.38)
mm (in.)
28 (1.1 0)
mm (in.)
34.5 (1.36)
mm (in.)
245.4 (9.7)
mm (in.)
72 x 35 (2.83 x 1.38)
mm (in.)
58 x 28 (2.28 x 1.10)
B.J.
T.J.
mm (in.)
395 x 28 (15.6 x 1.10)
Hypoid gear
3.545
Straight bevel gear x 2*
Straight bevel gear x 4
39
11
16
10
mm (in.)
82.500 x 45.242 (3.25 x 1.78)
mm (in.)
68.263 x 30.163 (2.69 x 1.19)
mm (in.)
76.200 x 36.513 (3.00 x 1.44)
Screw type
Differential carrier
B.J
.
Axle shaft
Rear Axle
Trailing arm
(Axle housing)
11 N0002
2-13