Room Monitoring - Panasonic S-ICX Technical Manual

Section 700 - Operation

Room Monitoring

Version 4.0 and higher
S-ICX Version 1.0 dosn't support this feature.
Description
This feature allows the user to monitor the sounds in a room from another extension or room. The
transmitter in the telephone handset is used as a remote "microphone" for monitoring these sounds.
To activate this feature, the monitored extension must enable the Room Monitor feature before the
monitoring extension can listen to the sounds in the room. The monitored extension can be enabled
using a SLT, DSLT, or Key Telephone. No special programming is required to allow an extension to
enable the monitored mode.
Operation
To set up the monitored extension:
1. Dial the monitored extension access code (default 775(UK/
HK) or 775#), OR...
Note:
The handset must be off-hook to activate the
Room Monitor feature.
Press an FF key assigned with the monitored access code
Additional operations may be performed from the monitored extension when it is in monitored mode:
1. Placing the handset back on-hook.
2. Pressing digits 0-9, *, #, HOLD, PROG, CONF, MEM-
ORY, MSG Key
3. Flash
Note: When a monitored extension receives a call, the caller hears a busy tone.
ICX-40-700
Action
Action
ICX (International) issued December 1999
Chapter 5. Key Telephone Features
Result
You will hear a confirmation tone after
the monitored extension has enabled the
Room Monitor feature. (If the monitored
extension has an LCD display, a confir-
mation message will also be shown.)
Result
Monitored mode is cancelled. Extension
returns to idle.
No response is given. Extension remains
in monitored mode.
Monitored mode is cancelled. Dial tone is
returned to handset.
5-69