Panasonic S-ICX Technical Manual page 246

Chapter 7. SLT Features
Considerations
• Account codes are not available during conversation recording mode for the Built-In Voice Mail.
• Even though up to 10 digits may be entered, the system verifies the ID based on the first 4 digits
only.
• Account codes will be cancelled after using exchange line queuing.-
• Account codes are not available for a Dial Pulse SLT.
• SLT telephones can only use account codes with outgoing calls only.
• Account Codes interact with TRS as shown in the following table:
Forced or Not Forced
Not Forced
Forced
Attendant Group Calls
Description
You can call the attendant group from any extension by dialing the designated attendant number.
Operation
To call an attendant group:
1. Lift the handset.
2. Enter the attendant pilot number (default = 0
9
).
Considerations
• Up to 20 extensions can be included in an attendant group.
• The attendant pilot number is flexible.
• If a member of an attendant group is for a virtual extension, multiple extensions in the attendant
group can be made to ring at once when the virtual number is dialed.
• Attendant calls are always tone calls (i.e., not voice calls).
7-6
Verified or
Non-Verified
Non-Verified
Verified
Non-Verified
Verified
Action
(UK/HK) or
ICX (International) issued December 1999
TRS Class
No Account Entry
Extension Port Based TRS
Class
TRS Class for Forced
Account Code
Intercom dial tone
Section 700 - Operation
Account Entry
Extension Port Based TRS
Class
Account Code Based TRS
Class
Extension Port Based TRS
Class
Account Code Based TRS
Class
Result
ICX-40-700