Set Call Forward Id Codes For Voice Mail - Panasonic S-ICX Technical Manual

Section 700 - Operation
Operation
To set a Call Forward Busy Destination Extension using either a large-display or
small-display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 4-3.)
2. At the 81 level, enter 09.
3. Press the HOLD key.
4. Enter 0.
5. Press the HOLD key.
6. Dial the extension number.
7. Press the HOLD key.
8. Enter the destination extension.
9. Press the HOLD key to store the entry.
10. To set Call Forward Busy destinations for additional
extensions, press the volume up and down key or press the
HOLD key to move to the desired Extension.
11. Repeat steps 9-11 until all extension are entered.
12. Press the MEMORY key to exit the entry mode.
13. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.

Set Call Forward ID Codes for Voice Mail

Description
(For a description of Call Forward ID codes for Voice Mail, see "Call Forward ID Code for Voice
Mail" on page 3-47.)
Voice Mail Call Forward ID codes are used by voice mail systems to identify the correct mail box for
storing messages. The actual entry needed will vary by voice mail systems and configuration. Often
the entry is the extension number.
ICX-40-700
Action
ICX (International) issued December 1999
Chapter 4. User Maintenance
Result
81-
User MAINT displays
8109-
TRF of CFWD displays
CFWD-Busy EXT # displays
Enter CODE displays
Next extension number displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
4-5