Onhook Dialing - Panasonic S-ICX Technical Manual

Chapter 5. Key Telephone Features
3. Press the one-touch key to be programmed.
4. If the System is set for MCO Code level, press the following
keys MEMORY * #. Otherwise, proceed to step 5.
5. Enter the desired feature code or extension number.
6. Press the HOLD key.
7. Replace the handset or press the ON/OFF key.
To check a programmed one-touch key:
1. Lift the handset or press the ON/OFF key.
2. Press the CONF key.
3. Press the one-touch key to be checked.
4. Replace the handset or press the ON/OFF key.
Considerations
• One-touch keys 1-10 are the same as Personal Speed Dial (PSDs) numbers 80-89.

Onhook Dialing

Description
Onhook Dialing is a standard feature for key telephones where you can dial onhook using the dialpad,
one-touch keys, or FF keys.
Operation
To dial onhook:
1. Press the ON/OFF key.
2. Dial the phone number.
5-66
Action
Action
Action
ICX (International) issued December 1999
Section 700 - Operation
Result
Result
Intercom dial tone
C displays
Programmed data displays
Result
Intercom dial tone
ICX-40-700