Chapter 3. System Features
Network Centralized Voice Mail
Version 3.5 and higher
Network Centralized Voice Mail allows one primary voice mail system to support the network. (This
feature does not apply to integrated Voice Mail or Built-In Voice Mail.)
Network Extension Calling
Network Extension Calling allows you to reach an extension on another PBX. Based on the number
you dial, the System network routes the call automatically.
Network Flash Transfer
Version 3.5 and higher
When three or more systems are networked together with one System as the tandem, Network Flash
Transfer determines where a call is held when Network Hold is pressed.
Network Hold
Version 3.5 and higher
Network Hold allows the user to place a call on hold by pressing a programmed line key or MCO key.
When using Network Hold, you cannot establish a conference call between nodes, and only one party
can place the call on hold.
Network Paging
Network Paging allows users on one System to page on another System when the appropriate Class of
Service (COS) allows.
Network Transfer Recall
Version 3.5 and higher
Network Transfer Recall allows a call which has been transferred to another node to recall back to the
transferring extension.
Tandem Connection
Tandem Connection allows calls that are received over the network tie lines to be automatically
routed on to another PBX or out to the public network.
Hardware Requirements
•
Q-SIG(PRI) or AC15 Card(UK), E&M(HK/TW)
Non-Blocking Architecture
Description
The System is totally non-blocking. All extension and outside lines are available for use at the same
time.
3-38
ICX (International) issued December 1999
Section 700 - Operation
ICX-40-700