Monitoring Incoming Calls - Panasonic KX-TG2344C Operating Instructions Manual

PQQX14041ZA.book 55 ページ ２００４年２月２０日 金曜日 午後３時３分

Monitoring Incoming Calls

While a caller is leaving a message, you can monitor the call through the base unit
speaker.
• To increase the speaker volume while monitoring, press VOLUME
To decrease the volume, press VOLUME
To answer a call while monitoring, press [C] or [s] on the handset.
To turn the incoming call monitoring feature off
When the base unit is not in use, press [GREETING CHECK], then press
VOLUME [<] repeatedly until "0" is displayed. (Make sure the Answering
System is turned on.)
OR
While monitoring, press VOLUME [<] repeatedly until "0" is displayed.
• If the incoming call monitoring feature is turned off, it will remain off when the next
call is monitored.
• If you adjust the speaker volume while playing back messages, the speaker
volume for monitoring will be turned on again. To turn the speaker volume off, see
"To turn the incoming call monitoring feature off" in the step above.
Automatic Answering Operation
Base Unit
[ ]
.
<
[ ]
.
>
55