Callback Request - Panasonic S-ICX Technical Manual

Chapter 6. DSLT Features
2. Dial the extension number.
3. Enter the Busy Override code (default = 9(UK/HK) or 0).
Considerations
• You cannot break in on three-party conference calls.
• The default for the Override Alert Tone is off . If the Override Alert Tone is enabled, the tone will
be sent to both parties when a call is overridden.

Callback Request

Description
If you dial a busy extension, Callback Request enables the System to call you back when that
extension becomes free. When you answer, the System automatically rings the called party again.
Operation
To set a Callback Request:
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. Enter the Callback Request code (default = 3(UK/HK) or
3#).
4. Replace the handset after you hear the ringback tone.
To respond to the callback request:
1. Lift the handset.
6-10
Action
Action
Action
ICX (International) issued December 1999
Section 700 - Operation
Result
Busy tone
• Alert tone sounds to both extensions
(system programming required)
• Connected to both parties
Result
Intercom dial tone
Busy tone
Ringback tone
System calls back when called extension
becomes free
Result
System automatically redials extension
ICX-40-700