Set System Speed Dial Index - Panasonic S-ICX Technical Manual

Section 700 - Operation
Operation
To change the system date, time, and day of week:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 4-3.)
2. At the 81 level, enter 000.
3. Press the HOLD key.
4. Enter the year (two characters), month (two characters), and
day (two characters).
Note: To clear an entry or existing data, press the FL/R
key.
5. Press the HOLD key.
6. Enter the hour (two characters) and minute (two characters).
Note: To clear an entry or existing data, press the FL/R
key.
7. Press the HOLD key.
8. Enter the day of week where:
1 = Mon, 2 = Tues., 3 = Wed., 4 = Thurs., 5 = Fri., 6 = Sat.,
0 = Sun.
Note: To clear an entry or existing data, press the FL/R
key.
9. Press the HOLD key to store the entry.
10. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.

Set System Speed Dial Index

Description
For a description of System Speed Dial (SSD), see "System Speed Dial" on page 5-74 for a Digital
Key Telephone, "System Speed Dial" on page 6-38 for a Digital Single Line Telephone (DSLT), and
"System Speed Dial" on page 7-31 for a Single Line Telephone (SLT).
ICX-40-700
Action
ICX (International) issued December 1999
Chapter 4. User Maintenance
Result
81-
User MAINT displays
0 :YYMMDD
Date displays
1 :HHMM
Time displays
2 :
Day of the Week displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
4-29