Table of Contents
Advertisement
Quick Links
Model shown is KX-TGF773.
Please register your product: http://shop.panasonic.com/support
TA Manual̲KX-TGF7xxUS̲series.pdf 1
Operating Instructions
Link2Cell Cordless Telephone with
Digital Answering Machine
Model No.
HD Link2Cell Cordless Telephone with
Digital Answering Machine
Model No.
KX-TGF773
KX-TGF774
KX-TGF775
KX-TG975SK
KX-TGF783
KX-TGF784
KX-TGF785
KX-TG985SK
2018/09/27 8:25:54
Advertisement
Table of Contents
Need help?
Do you have a question about the KX-TGF770 Series and is the answer not in the manual?
Questions and answers
i had to use my cell link as the phone voice mail was inoperative. its been repaired. how do i remove the word cell on the handset and go back to use voicemail?
To remove the "cell" label and switch back to using voicemail on the Panasonic KX-TGF770 Series handset:
1. Unpair the cellular phone if you no longer use the Link-to-Cell feature.
2. Before connecting the telephone line to the base unit, set the mode to "Off" in step 2 of the "Cellular line only mode" menu.
3. The base unit will reboot after this mode is turned off.
4. To access voicemail, press the MACCESSN soft key (if displayed) or follow these steps:
- Press MMENUN#330 on the handset.
- Follow the pre-recorded instructions.
- When finished, hang up.
If the message indicator remains after checking messages, press and hold # until the unit beeps to clear the notification.
This answer is automatically generated
I've used the Panasonic phone system for years, but now only want to use the system as INTERCOM ONLY communication,only, with my Gate Entry System (which I've been connected to the Gate Intercom for years, but along with a normal phone line system, which I no longer have, Can I use the Panasonic system as an Intercom only system with no outside phone line involved, and if so how?
Yes, the Panasonic KX-TGF770 Series can be used as an intercom-only system without an outside phone line. To do this, do not connect the telephone line cord and use only the internal communication features like Intercom. For more convenience, set the unit to "cellular line only mode" if using cellular lines, or simply skip connecting to any phone service if using only intercom functions.
This answer is automatically generated
HOW DO YOU SET THE NUMBER OF RINGS ON YOU PHONE
To set the number of rings on the Panasonic KX-TGF770 Series phone:
1. On the handset, press MENUN.
2. Enter #211.
3. Use the navigation button (MbN) to select the desired number of rings (2 to 7, or "Toll saver").
4. Press SAVEN to save the setting.
5. Press OFFN to exit.
This answer is automatically generated
How does Sleep (do not disturb) function work? and how do you set it?.
The Sleep (Do Not Disturb) function on the Panasonic KX-TGF770 Series is called "Silent mode." It prevents incoming calls from ringing at certain times, such as when sleeping. Silent mode can be set individually for each handset or base unit.
To set Silent mode:
1. On the handset, press MMENU, then enter #237.
2. Set the desired start and end time (e.g., 11:00 PM to 6:00 AM).
3. Save the setting.
To turn Silent mode on or off:
1. Press MMENU, then enter #238.
2. Select "On" or "Off" and save.
You can also allow specific caller groups to bypass Silent mode:
1. Press MMENU, then enter #241.
2. Select the groups allowed to ring during Silent mode.
3. Save the setting.
Note: The phone's date and time must be set correctly, and the alarm will still sound even if Silent mode is on.
This answer is automatically generated
My grandmas Landline says all her messages are full, even though I’ve already cleared all the messages. I tried to call her, but it still said everything was full
The Panasonic KX-TGF770 Series landline may say the message inbox is full even after clearing all messages because:
- The message memory is still full due to saved messages or system data. You need to erase unnecessary messages as described on pages 74–75.
- The system may not have properly deleted all messages. Try deleting them again and ensure the deletion is confirmed.
- The answering system may be set to “Greeting only,” which disables message recording. Check and change this setting if needed (page 79).
This answer is automatically generated
We had to replace our modem. After hooking up the phone to the modem, the phone lights up, but there is no dial tone and calls go directly to voice mail - though the messages don’t come through. What can we try??? Thanks!
Troubleshooting steps for the Panasonic KX-TGF770 Series phone when there is no dial tone and calls go directly to voicemail after replacing the modem:
1. Check AC Adaptor: Ensure the base unit’s AC adaptor is properly connected.
2. Move Closer: Make sure the handset is within range of the base unit.
3. Register Handset: If the handset is not registered to the base unit, register it.
4. DSL/ADSL Filter: If using DSL/ADSL service, connect a DSL/ADSL filter between the base unit and the telephone line jack.
5. Voicemail Settings: Ensure your phone service provider sends voicemail tones. If not, turn off the unit’s voicemail tone detection feature.
6. Ring Settings: Make sure the unit is set to answer before the service provider’s voicemail (e.g., 4 rings on the unit vs. 6 rings for voicemail). Adjust if needed.
These steps help ensure proper line connection and voicemail function.
This answer is automatically generated
How to turn up the volume on the base
To increase the volume on the Panasonic KX-TGF770 Series base, press the MDN (up) button repeatedly during a call to adjust the speaker volume.
This answer is automatically generated
How to move your phone book to caller list
To transfer phonebook contacts to the caller list on the Panasonic KX-TGF770 Series, follow these steps:
1. On the base unit, press [MENU].
2. Select "Phonebook" and press [SELECT].
3. Choose the desired phonebook entry.
4. The entry is automatically assigned to “Home.”
5. If needed, edit the caller name or assign the entry to a group using the handset.
For further customization, you can group contacts under categories like "Friends" or "Family" for easier access.
This answer is automatically generated
How to restore caller list
The provided context does not contain specific instructions on restoring the caller list on the Panasonic KX-TGF770 Series. However, you can view the caller list using the operation code #213. If the caller list was deleted, it may not be possible to restore it.
This answer is automatically generated
This phone Model KX-TGF780 1HAC no longer screens calls, or announces incoming calls by name, or records name and phone number of caller. From time to time it does not complete an out going call.
1. Check Call Screening Settings – Ensure that call screening is enabled. (Page 78)
2. Verify Answering System Settings – Confirm that the answering system is turned on. (Page 74, 77)
3. Check Number of Rings – Adjust the ring count setting if necessary. (Page 78)
4. Ensure Sufficient Recording Time – Confirm that the recording time is not set to "Greeting only." (Page 79)
5. Clear Error Messages – Check for any error messages that might indicate a problem. (Page 83)
6. Reset the Phone – If issues persist, try disconnecting power and reconnecting after a few minutes.
7. Contact Support – If the problem continues, seek assistance from Panasonic support.
This answer is automatically generated