Call Privacy Feature; Room Monitor Feature; Room Monitor - Panasonic KX-TSC909CID Operating Instructions Manual

Call Privacy Feature

To prevent other users from joining your conversation, turn this feature on during a
call. To allow other users to join your conversation, leave the feature off.
To turn the Call Privacy feature on
Base unit: Press [PRIVACY] while talking.
Cordless handset: Press the soft key (
• "PRIVACY" will be displayed.
• To turn the feature off, press [PRIVACY] on the base unit or press the soft key
( ) on the cordless handset again while talking.
PRIVACY
• When the Call Privacy feature is turned on, other users cannot join the
conversation. The feature will return to off after you hang up the call.

Room Monitor Feature

This feature allows you to monitor a room through the unit by using the intercom
feature. For example, you can monitor a baby from different areas of the house. You
can call the destination unit to monitor the room. The called unit will not ring. When
the system has one or more additional cordless handsets (p. 23), you can monitor
through one cordless handset to another.
If you allow other users to monitor through your unit, turn the feature on. If you want
to prevent your unit from being monitored by other extensions, leave this feature off
(factory preset).
To turn the Room Monitor feature on
(to allow other users to monitor through your base unit or cordless handset)
You can turn the feature on on the base unit and the cordless handset separately.
1
Base unit: Press [FUNCTION/EDIT].
Cordless handset: Press [CONF/FUNCTION]
2
Scroll to "Initial setting" by pressing
[ ] or [ ], then press [ ].
3
Scroll to "Room monitor" by pressing [ ]
or [ ], then press [ ].
4
Select "On" by pressing [ ] or [ ].
5
Base unit: Press [ ] (Save), then press [STOP].
Cordless handset: Press the soft key (
• To prevent your base unit or cordless handset from being monitored, select "Off"
in step 4.
44
Base Unit Handset
) while talking.
PRIVACY
Base Unit Handset
.

Room monitor

), then press [OFF].
SA VE
Initial setting
Room monitor
:On