Room Monitor; Room Monitor - Panasonic KX-TG5230 Operating Instructions Manual

Room Monitor

This feature allows you to monitor a room by using the intercom feature. For
example, you can monitor a baby from different areas of the house. You can call the
destination unit to monitor the room. The called unit will not ring. When the system
has two or more handsets (p. 3), you can monitor one handset using another. To
allow other users to monitor through your unit, turn this feature on. If you want to
prevent your unit from being monitored by other extensions, leave this feature off.
Using the handset, this feature can be turned on or off separately for the handset
and base unit. The factory preset is OFF.
To turn Room Monitor on for the handset
(to allow other users to monitor through your handset)
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Scroll to "Room monitor" by pressing [d] or
[B], then press the soft key (
4
Select "On" by pressing [d] or [B].
5
Press the soft key (
• To prevent your handset from being monitored, select "Off" in step 4.
To turn Room Monitor on for the base unit
(to allow other users to monitor through your base unit)
1
Follow steps 1 and 2 of "To turn Room Monitor on for the handset"
above.
2
Scroll to "Set base unit" by pressing [d]
or [B], then press the soft key (
3
Scroll to "Room monitor" by pressing [d] or
[B], then press the soft key (
4
Select "On" by pressing [d] or [B].
5
Press the soft key (
• To prevent your base unit from being monitored, select "Off" in step 4.
For assistance, please call: 1-800-211-PANA(7262)
SELECT
).
SELECT
), then press [OFF].
SAVE
SELECT
).
SELECT
), then press [OFF].
SAVE
Handset
Initial setting
).

Room monitor

Room monitor
:On
Handset
Set base unit
).
Room monitor
Room monitor
:On
49