Set Day Of Week Mode - Panasonic S-ICX Technical Manual

Chapter 4. User Maintenance
Number of Cabinets
5
6
Operation
To set a Caller ID Logging Extensions using either a large-display or small-display
phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 4-3.)
2. At the 81 level, enter 10.
3. Press the HOLD key.
4. Press the HOLD key.
5. Enter log control number.
6. Press the HOLD key.
7. Dial the extension number.
8. Press the HOLD key to store the entry.
9. To set CID Log for additional extensions, press the volume
up and down key or press the HOLD key to move to the
desired Extension.
10. Repeat steps 6-8 until all extension are entered.
11. Press the MEMORY key to exit the entry mode.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.

Set Day of Week Mode

Description
(For a description of Automatic Day/Night System Mode, see "Automatic Day/Night Mode" on page
3-21.)
The System allows you to specify up to 3 mode patterns. This menu item determines which pattern to
follow for a given week day in the month (i.e., first Monday, second Monday, etc.).
Some bushiness may have special operating hours based on the day of the month. For instance, a
company may work half-days on the second Saturday of each month.
4-8
Total Number of
Call Log Extensions
100
120
Action
ICX (International) issued December 1999
Section 700 - Operation
Result
81-
User MAINT displays
8110-
CID Logging EXT displays
CID Logging # displays
Next log control # displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
ICX-40-700