Speed Dial Name Assignments - Panasonic S-ICX Technical Manual

Section 700 - Operation
6. Enter the SSD bin number (00-79 or 000-799) that contains
the first part of the number to be dialed.
7. Repeat steps 5-6 up to 5 more times for all additional SSDs
to be dialed.
8. Press the HOLD key when finished.
To use a PSD Key that links multiple SSDs:
1. If necessary, select the exchange line group (9(UK/HK )or
0, 81-84). (Normally the exchange line is selected by the
speed dial numbers.)
2. Press the PSD key.
To manually link speed dial keys together:
1. Lift the handset or press the ON/OFF key.
2. If necessary, access an outside line.
3. If you are using a PSD number, press the one-touch key for
the first part of the number.
If you are using an SSD number, press the MEMORY key,
then enter the SSD bin number.
4. Use the one-touch keys or press the MEMORY key and
enter the SSD codes to dial the parts of the phone number
until it is completed.

Speed Dial Name Assignments

You can assign names to PSD numbers from a key telephone without entering the programming
mode. If allowed in the Extension Class of Service (COS), you can also assign names to SSD
numbers.
(PSD names can contain a maximum of 7 characters. SSD names can contain a maximum of 16
characters.)
Operation
PSD Names:
ICX-40-700
Action
Action
Action
ICX (International) issued December 1999
Chapter 5. Key Telephone Features
Result
Stored PSDXXX displays
Result
Result
Intercom dial tone
5-77