Room Monitor - Panasonic KX-TG6500C Operating Instructions Manual

TG6500C_CordlessTel2.fm Page 64 Thursday, September 30, 2004 4:56 PM

Room Monitor

This feature allows you to monitor a room by using the intercom feature. For
example, you can monitor a baby from different areas of the house. You can call the
destination unit to monitor the room. The called unit will not ring. When the system
has 2 or more handsets (p. 3), you can monitor 1 handset using another. To allow
other users to monitor through your unit, turn this feature on. If you want to prevent
your unit from being monitored by other extensions, leave this feature off. Using the
handset, this feature can be turned on or off separately for the handset and base
unit. The factory preset is OFF.
To turn Room Monitor on for the handset
(to allow other users to monitor through your handset)
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Scroll to "Room monitor" by pressing [d] or
[B], then press the soft key (
4
Select "On" by pressing [d] or [B].
5
Press the soft key (
• To prevent your handset from being monitored, select "Off" in step 4.
To turn Room Monitor on for the base unit
(to allow other users to monitor through your base unit)
1
Follow steps 1 and 2 of "To turn Room Monitor on for the handset"
above.
2
Scroll to "Set base unit" by pressing [d]
or [B], then press the soft key (
3
Scroll to "Room monitor" by pressing [d] or
[B], then press the soft key (
4
Select "On" by pressing [d] or [B].
5
Press the soft key (
• To prevent your base unit from being monitored, select "Off" in step 4.
64
SELECT
).
SELECT
), then press [OFF].
SAVE
).
SELECT
).
SELECT
), then press [OFF].
SAVE
Handset
Initial setting
).
Room monitor
Room monitor
:On
Handset
Set base unit
Room monitor
Room monitor
:On