Panasonic S-ICX Technical Manual page 219

Section 700 - Operation
To set DND for another extension:
1. Lift the handset or press the ON/OFF key.
2. Enter the DND Set by Other Phone code (default =
(UK/HK) or 740#
740
3. Dial the extension number.
4. Replace the handset or press the ON/OFF key.
To cancel DND for another extension:
1. Lift the handset or press the ON/OFF key.
2. Enter the DND Cancel by Other Phone code (default =
(UK/HK) or 750#
750
3. Dial the extension number.
4. Replace the handset or press the ON/OFF key.
Considerations
• Forced DND override is available.
• DND override function is available by Busy Override code.
DP to DTMF Signal Conversion
Description
Dial Pulse (DP) to Dual Tone Multifrequency (DTMF) Signal Conversion allows you to switch from
DP to DTMF signaling when using a DP exchange line. For instance, if you dial into a Voice Mail
system using a DP exchange line, you can switch to DTMF signaling to communicate with the Voice
Mail system. (The System can automatically change DP to DTMF tones based on the incoming and
outgoing timers).
Operation
To switch from DP to DTMF dialing:
1. Press the * key or the # key.
ICX-40-700
Action
).
Action
).
Action
ICX (International) issued December 1999
Chapter 6. DSLT Features
Result
Intercom dial tone
Result
Intercom dial tone
Result
6-27