Network Facilities; Network Attendant Reversion; Network Call Routing; Network Call Transfer - Panasonic S-ICX Technical Manual

Section 700 - Operation
Considerations
• PSD names can contain a maximum of 7 characters. SSD names can contain a maximum of 16
characters.
• The ability to make extension name assignments is allowed/restricted to anyone with a Class of
Service (COS) that allows access to User Maintenance features. (See Chapter 4 "User
Maintenance" of this document.)

Network Facilities

Description
The System supports networking facilities such as:
• Network Attendant Reversion (Version 3.5 and higher)
•

Network Call Routing

•

Network Call Transfer

• Network Centralized Attendant (Version 3.5 and higher)
• Network Centralized Voice Mail (Version 3.5 and higher)
• Networking Extension Calling
• Network Flash Transfer (Version 3.5 and higher)
• Network Hold (Version 3.5 and higher)
• Network Paging
• Network Transfer Recall (Version 3.5 and higher)
• Tandem Calling
For more information on System Networking, see the System Networking Reference Manual.

Network Attendant Reversion

Version 3.5 and higher
Network Attendant Reversion enables calls to revert to the attendant in the same cabinet. Calls will
not revert if the cabinet receiving the call has no attendant. Network Attendant Reversion does not
work with Network Hold.
Network Call Routing
Network Call Routing allows multiple systems that are interconnected in a network, to direct calls to a
specific tie line based on the number dialed. The call does not leave the network.
Network Call Transfer
Network Call Transfer allows a call at an extension to be transferred to another extension in the
network.

Network Centralized Attendant

Version 3.5 and higher
Network Centralized Attendant allows one primary attendant group in the network to handle network
attendant calls.
ICX-40-700 ICX (International) issued December 1999
Chapter 3. System Features
3-37