Do-Not-Disturb - Panasonic S-ICX Technical Manual

Chapter 6. DSLT Features
• When three parties are conferenced, a built-in 3-party conference circuit is used. If no 3-party
conference circuit is available, a conference cannot be established.
• When a fourth party is added, the conference is moved to a conference circuit on the 8-party
conference card. If an 8-party conference circuit is not available, a fourth party cannot be added
to a conference.
• Once an 8-party conference circuit is used, it continues to be used as long as the conference
continues.
• An 8-party conference card supports up to four 8-party conference circuits. However, the card
must be placed in cabinet slots 1, 5, or 9 to support more than one 8-party conference circuit (and
jumpered accordingly).

Do-Not-Disturb

Description
You can make an extension unavailable by activating the Do-Not-Disturb (DND) feature. When DND
is activated, calls to that extension receive busy tone.
You can set or cancel DND from either your extension or from an alternate extension.
Operation
To set DND for your own extension:
1. Lift the handset or press the ON/OFF key.
2. Enter the DND Set/Cancel code (default = 720
720#
).
3. Replace the handset or press the ON/OFF key.
To cancel DND for your own extension:
1. Lift the handset or press the ON/OFF key.
2. Enter the DND Set/Cancel code (default = 720
720#
).
3. Replace the handset or press the ON/OFF key.
6-26
Action
(UK/HK) or
Action
(UK/HK) or
ICX (International) issued December 1999
Section 700 - Operation
Result
Intercom dial tone
Result
Intercom dial tone
ICX-40-700