Chapter 4. User Maintenance
Set Personal Speed Dial Names
Description
For a description of Personal Speed Dial (PSD), see "Personal Speed Dial" on page 5-75 for a Digital
Key Telephone, "Personal Speed Dial" on page 6-42 for a Digital Single Line Telephone (DSLT), and
"Personal Speed Dial" on page 7-35 for a Single Line Telephone (SLT).
Operation
To set PSD names using either a large-display or small-display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 4-3.)
2. At the 81 level, enter 01.
3. Press the HOLD key.
4. Enter 1.
5. Press the HOLD key.
6. Press the HOLD key.
7. Dial the extension number.
8. Press the HOLD key.
9. Enter the PSD bin number (80-99).
10. Press the HOLD key.
11. Enter the PSD name:
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
4-17.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 4-18.)
Note: Press the FL/R key to clear any existing data.
12. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-display phone on page 4-17.
• See Example 2. Small-display phone on page 4-18.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
13. Repeat steps 11-12 as many times as necessary to enter the
desired speed dial name.
Note: Press the FL/R key to clear the entire entry.
4-16
Action
ICX (International) issued December 1999
Section 700 - Operation
Result
81-
User MAINT displays
8101-
PSD Assignment displays
1
:
PSD Name displays
EXT Number displays
Enter PSD # XXX displays (where
XXX = dialed extension number)
A B C D E F PXX displays (where
PXX = PSD number)
ICX-40-700