Set Caller Id Logging Extensions - Panasonic S-ICX Technical Manual

Section 700 - Operation
Operation
To set a Call Forward Busy Destination Extension using either a large-display or
small-display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 4-3.)
2. At the 81 level, enter 09.
3. Press the HOLD key.
4. Enter 1.
5. Press the HOLD key.
6. Dial the extension number.
7. Press the HOLD key.
8. Enter the destination extension.
9. Press the HOLD key to store the entry.
10. To set Call Forward No Answer destinations for additional
extensions, press the volume up and down key or press the
HOLD key to move to the desired Extension.
11. Repeat steps 9-11 until all extension are entered.
12. Press the REDIAL key to exit the entry mode.
13. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.

Set Caller ID Logging Extensions

Description
You can assign Caller ID Call Logging to extensions. The system is limited to 20 call logging
extensions per cabinet as follows:1
Number of Cabinets
1
2
3
4
ICX-40-700
Action
Total Number of
Call Log Extensions
20
40
60
80
ICX (International) issued December 1999
Chapter 4. User Maintenance
Result
81-
User MAINT displays
8109-
TRF of CFWD displays
CFWD-NoANS Ext displays
Enter CODE displays
Next extension number displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
4-7