Conference Calls - Panasonic S-ICX Technical Manual

Chapter 6. DSLT Features
3. Enter the Camp-on (Call Waiting) code (default = 2(UK/
HK) or 2#).
4. Remain on the line until the called party answers.
To answer a Camp-on (Call Waiting) signal:
1. Replace the handset or press the ON/OFF key.
2. Lift the handset or press the ON/OFF key again to be con-
nected to the waiting call.
OR....
Press the HOLD key.
Considerations
• You can transfer an outside call to a busy extension using Camp-on. See "Camping a Call Onto a
Busy Extension" on page 6-22.

Conference Calls

Description
Conference Calls allow you to add another party to an existing conversation. With the standard
system configuration, up to 3 parties can be included in a conference call at any one time. If the
optional Conference Card is installed, additional parties up to a total of 8 can participate in a
conference call.
The CPC Version 3.0 software release allows any combination of extensions and exchange lines be in
the conference as long as the original extension is in the conference and the total number of parties
does not exceed 8. With Version 3.0 software, only one operation is used to establish and add to a
conference. You simply have to place the current call on hold, dial the next party and press the CONF
key. No different operation or access code is required to add additional parties to the call.
When no optional conference card is installed, the system supports the following types of three-party
conference calls:
• 3 extensions
• 2 extensions and 1 exchange line
• 1 extension and 2 exchange lines
When the optional 8-party conference card is installed, the System supports any combination of
conference calls, except all outside lines.
6-24
Action
Action
ICX (International) issued December 1999
Section 700 - Operation
Result
• Called party hears alert tone
• Calling party hears ringback tone
Result
• Current call placed on hold
• Connected to waiting call
ICX-40-700