Offhook Voice Announce - Panasonic S-ICX Technical Manual

Chapter 5. Key Telephone Features
Operation
After receiving an offhook signal during a call:
1. Press the HOLD key.
2. Press the flashing FF key for the CO/Exchange line of the
incoming call.
Note: For details about handling multiple calls, see "Call Hold" on page 5-16.
Considerations
• The CO/Exchange line call type may be multiple ring, direct, BLF Ring, or camp-on.
• The System does not send the offhook signal under the following conditions:
• During a conference call
• During an OHVA or Busy override
• Data Privacy is enabled
• the receiving telephone is a 3rd party voice mail.

Offhook Voice Announce

Version 2.0 or Higher
Description
You can interrupt a busy extension when making an Intercom Call, and then use the Off-Hook Voice
Announce (OHVA) feature to make an announcement that only the called party can hear. You can
also transfer a held call to a busy extension after making the announcement using this feature. The
called party may optionally reply to (answer) an OHVA call.
Beginning with CPC Version 3.0, the busy party can reply to an offhook announcement with a text
message that displays on the announcing phone. Any one of the following messages can be selected.
Messages 6 to 9 and 0 have no default message text. All the messages can be changed through system
programming. (See "Set Text Message Replies" on page 4-33 for more information on setting Text
Message Replies).
Table 5-6. Text Message Replies
Message No.
1
2
3
4
5
5-62
Action
Message Text
Take A Message
Please Hold
Will Call Back
Transfer
Unavailable
ICX (International) issued December 1999
First call on hold
Message No.
6
7
8
9
0
Section 700 - Operation
Result
Message Text
User Defined
User Defined
User Defined
User Defined
User Defined
ICX-40-700