General Information
Mounting Surface Specifications
1-18
Minimum clearances for the Phaser 6121MFP/N
81.4 cm
(32.0 in.)
10 cm
(3.9 in.)
These specifications apply to any printer used as a table-top printer.
Mounting surface flatness must be within the specified range. The printer must
not be tipped or tilted more than 2 degrees.
2°
60.5 cm
(23.8 in.)
79.4 cm
(31.3 in.)
25.4 cm
(10.0 in.)
10 cm
(3.9 in.)
s6121mfp-179
2°
s6121mfp-180
Phaser 6121MFP Service Manual