Other Error/Warning Messages - Xerox Phaser 6121MFP Service Manual

Error Messages and Codes

Other Error/Warning Messages

3-50
Error code: 00FE
Definition: Memory full for transmission.
Solution:
1. Split the document into several copies, and send them individually.
2. Print out the receiving data which was stored in the fax memory or delete the
unnecessary data.
3. Reboot the machine.
4. Execute MEMORY CLEAR.
Error code: 00FF
Definition: Redial failed.
Solution:
1. Check whether the dialing number is correct or not.
2. Check whether the telephone line is connected correctly or not.
3. Faxing by Manual TX.
4. Check that the machine setting matches the switchboard.
5. Adjust the SOFT SW07[8] to "0", disable the dial tone detect before dial.
6. Adjust the SOFT SW21[1-2] to "11", increase T1 time.
7. Adjust the SOFT SW15[6-8] to "000" or "001" or "010" or "101", to match the
switchboard environment.
These are errors that require customers to do some corrective action. Some require
user intervention to continue printing.
Message
Toner not installed
Install CMYK toner
Toner empty
Replace CMYK toner
Toner life end
Replace CMYK toner
Invalid Toner
Replace with correct
toner and press OK
Imaging Unit life at
end of life. Replace
Imaging Unit
Memory file full
(Press any key)
Description
The indicated toner cartridge(s) is missing.
The indicated toner cartridge(s) is empty.
The indicated toner cartridge(s) is at end of life and
should be replaced.
Indicates a non Xerox toner cartridge is installed.
The Imaging Unit is at end of life.
Memory is full. Clear/print saved fax jobs.
Phaser 6121MFP Service Manual