Xerox Phaser 6121MFP Service Manual page 157

Phaser 6121MFP Service Manual
Message
Paper size error
Load ( ) paper
Output tray full
Remove output paper
Tray2 open
Close Tray2
Tray2 empty
Load ( ) paper
Top cover open
Close top cover
Duplex cover open
Close duplex cover
Reproduction of this
original may be
prohibited. Please
check the original.
Fax request ( )
Load ( ) paper
(Press any key)
Phone line in use
Check the handset
Phone line problem
Check phone line
(Press any key)
Redials failed
Please resend
(Press any key)
Fax data lost
Memory full
Unable to scan/fax
(Press any key)
Memory file full
Unable to scan/fax
(Press any key)
Job cancelled
(Press any key)
Unable to connect
xxxx Server
(Press any key)
FTP server error
SMB server error
(Press any key)
Incorrect password
for xxxx Server
(Press any key)
Description
Paper size error in printing.
The Output Tray is filled to capacity.
The 500-sheet feeder tray is open.
The 500-sheet feeder tray is empty.
The top cover is open.
The Duplex Unit cover is open.
This error occurs when the printer detects that it is
scanning currency.
A Fax job specifying a specific paper type/size has
been requested. Load the appropriate paper to
continue.
The fax line is in use.
Fax line problem.
The specified number of redials failed to successfully
complete the fax job.
Fax data was lost. Retry sending the fax job.
The memory is full and the printer is unable to scan or
fax.
Memory is full. Clear/print saved fax jobs.
The job was cancelled.
The printer was unable to connect to the server.
Where xxxx can be SMTP, POP3, DNS, SMS, or LDAP.
An error occurred at the server.
An error occurred at the server.
The password specified for xxxx server is incorrect.
Where xxxx can be SMTP, POP3, LDAP, FTP, or SMB.
Error Messages and Codes
3-51