Phaser 6121MFP Service Manual
Scan from ADF
The Scanner performs these steps during a scan of an original placed on the
platen.
•
The exposure unit moves from the home position (stand-by position) reading
the shading sheet to make a shading compensation.
•
The exposure units moves to the stand-by position.
•
It moves to ADF reading position and original image reading starts.
•
After the reading completes, the exposure lamp turns OFF and moves to the
stand-by position.
•
After it moves again to detect the reference position, it moves to the stand-by
position and stops.
ADF Reading
Position
Original
Reading
Home Position (Stand-by Position)
Reference Position
Shading
Reference Position Detection
Theory of Operation
s6121mfp-116
2-19