Phaser 6121MFP Service Manual
Troubleshooting Procedure Table (continued)
Step Actions and Questions
6
Check the cable type.
Two-conductor (PSTN)
Four-conductor (PBX)
Check the cable condition.
Normal continuity
Straight, unlooped, uncoiled routing
Appropriate cable length
Is the cable type correct and in good
condition?
7
Is the paper size correct?
8
Press the Fax button, and then select
Delay Send.
Is the Delayed Send on?
9
Is the Delayed Send on a specified time,
and does the Fax job complete at the
specified time?
10
Is the Local Time setting correct?
11
Replace the Image Processor Board
(page 8-66).
General Troubleshooting
Yes
No
Go to step 7.
Replace the
cable.
Go to step 8.
Replace the
paper.
Go to step 9.
Go to step
11.
Complete.
Go to step
10.
Go to step 11. Set the Local
Time setting.
Complete.
4-25