ADF Unit
PL1.1.6
Phaser 6121MFP Service Manual
18. Pull out the harnesses and remove the Scanner.
Replacement Note
Thread the harnesses through the second harness guide before putting the
scanner back on the printer.
Replacement Note
When replacing the scanner, you must transfer the following parts from the
old assembly to the new scanner before reinstallation:
•
ADF
•
Spring Mechanism
•
Exit Chute
1. Remove the scanner unit (page 8-31).
2. Remove 2 screws (silver, tap, 10 mm).
Service Parts Disassembly
s6121mfp-217
8-39