Error Messages - Xerox Phaser 6121MFP Service Manual

Error Messages and Codes

Error Messages

Jam Errors
3-4
When a misfeed occurs, the printer displays the corresponding misfeed status on
the control panel. Jam error code troubleshooting procedures begin on page 3-56.
Message
Jam at Tray2
Clear jam and
open and close cover
Check Tray1 paper
Load paper
or remove top sheet.
(Press Start key)
to continue
Jam at Duplex Unit
Open top cover and
duplex unit cover
(Press any key)
Jam at Duplex Unit
Open Duplex cover
clear jammed paper
Jam at Transfer
Open top cover and
remove Imaging Unit
clear jammed paper
close top cover
Jam at Fuser
Open top cover
clear jammed paper
Jam at Output tray
Open Top cover
Original Doc. Jam
Open Doc. Feeder and
clear the original.
Reinsert original
and press the Start key.
Description
Jam at Tray 2.
Tray 1 is empty of paper, or there is a paper jam at
feed section.
Paper jam at the Duplex Unit.
Paper jam in the Duplex Unit.
Paper jam at Transfer Roller.
Paper jam at Fuser.
Paper jam at Output tray.
Paper jam at the ADF.
Phaser 6121MFP Service Manual