Scan Errors - Xerox Phaser 6121MFP Service Manual

Scan Errors

Phaser 6121MFP Service Manual
Message
Code Message
CF01 Controller failure
CODE (CF01)
Turn power off, on
Code Display
0100 CANNOT CONNECT
SMTP Server
0101 CANNOT CONNECT
POP3 Server
0102 CANNOT CONNECT
DNS Server
0103 CANNOT CONNECT
FTP Proxy Server
0104 CANNOT CONNECT
SMB Server
0106 FTP SERVER ERROR
0107 SMB SERVER ERROR
0108 WRONG PASSWORD
FTP Server
0109 WRONG PASSWORD
SMB Server
010A WRONG PASSWORD
SMTP Server
010B WRONG PASSWORD
POP3 Server
010D SERVER MEMORY FULL
SMTP Server
010F CANNOT GET IP
SMTP Server
0110 CANNOT GET IP
POP3 Server
0111 CANNOT GET IP
FTP Server
Error Messages and Codes
Troubleshooting
Procedure
page 3-87
Content
A connection with the specified server
was not established when the scanned
document was sent in Scan mode..
The file cannot be saved on the
indicated server.
The password is incorrect, so the
indicated server was not accessed.
The memory of the SMTP server has
become full.
The IP address of the server was not
obtained from the DNS server.
3-7