High Voltage Board - Xerox Phaser 6121MFP Service Manual

High Voltage Board

PL13.0.6
Phaser 6121MFP Service Manual
3. Remove the gear, bushing, 2 holders, and 2 collars.
Item Description
1 Collar
2 Cap
3 Holder
Replacement Note
If the Transfer Roller is replaced with a new one.
1. Reset the Transfer Roller counter in the service menu. See page 6-27.
2. It is highly recommended that the Feed and Separator Rollers be
replaced also.
1. Remove the Right Cover (page 8-29).
2. Disconnect three connectors (CN1, CN2, and T2) from the High Voltage Board.
Service Parts Disassembly
1
2
3
s6121mfp-326
8-57