Xerox Phaser 6121MFP Service Manual page 514

Reference
Copy Default Setup Menu
A-8
Menu Item
Copy Default Setup
System Menu
Menu Item
Paper Default
(Phaser 6121MFP/N and
/D printer configurations
with the optional
500-sheet feeder
installed)
Original Document
Type
Lighten/Darken
Collate Default
(Phaser 6121MFP/N and
/D printer configurations
only)
Sides Default
(Phaser 6121MFP/N and
/D printer configurations
only)
Preset Units
(Phaser 6121MFP/S
printer configuration
only)
Contents
Paper Default (Phaser 6121MFP/N and /D printer
configurations only)
Original Document Type
Lighten/Darken
Collate Default (Phaser 6121MFP/N and /D printer
configurations only)
Sides Default (Phaser 6121MFP/N and /D printer
configurations only)
Preset Units (Phaser 6121MFP/S printer only)
For details, see "Copy Default Setup Menu" on
page A-8.
Provides accesses to the System Menu (page A-4).
Function
Specifies the default tray to use as the paper source
for copies. If you do not have Tray 2 installed
(optional only for Phaser 6121MFP/N and /D printer
configurations), this setting is not available.
Specifies the type of content being copied:
Mixed, Fine/Mixed – Text with images/photos.
Photo, Fine/Photo – Photos only.
Text, Fine/Text – Text only.
Specifies how light or dark the resulting copied image
is (also called "copy density").
Specifies whether copy sorting is on or off.
Off – Double-sided copying is off.
Long Edge Flip – Copied pages are printed so that
they flip over at the side, along the long edge of the
paper.
Short Edge Flip – Copied pages are printed so that
they flip over at the top, along the short edge of the
paper.
Specifies the unit of measurement used when setting
paper and copy sizes:
Inch
Metric
Phaser 6121MFP Service Manual