Protocol Report - Xerox Phaser 6121MFP Service Manual

Adjustments and Calibrations

Protocol Report

GDI Time-out
6-12
The Protocol Report provides transmission results, timing, and communications
activity information about each Fax transmission.
Default Setting
The default setting is Off.
Available Settings
• Off: Disable the T.30 communication report.
• On: Print a T.30 communication report after every Fax transmission.
• On Error: Print a T.30 communication report only when an error occurs.
Specifies the time for GDI time out.
Default Setting
The default setting is 60 seconds.
Available Settings
• 5 Sec
• 10 Sec
• 20 Sec
• 30 Sec
• 40 Sec
• 50 Sec
• 60 Sec
Phaser 6121MFP Service Manual