Xerox Phaser 6121MFP Service Manual page 378

Multi-function printer

Hide thumbs Also See for Phaser 6121MFP:

Table of Contents

Service Parts Disassembly

3. Remove 4 screws (two metal, 6mm, and two metal, 8mm).

4. Press down on the lower tab and remove the High Voltage Board.

Replacement Note

When replacing the High Voltage Board:

1. Ensure that the board is installed underneath all four tabs. See step 4.

2. Use the correct screws on each side of the board (on the left use two

6mm screws, on the right use two 8mm screws).

s6121mfp-231

s6121mfp-232

Phaser 6121MFP Service Manual

Troubleshooting