Poor Fusing Performance Or Offset - Xerox Phaser 6121MFP Service Manual

Print-Quality Troubleshooting

Poor Fusing Performance or Offset

Initial Actions
5-26
The fusing process or offset is incorrect.
Perform the initial actions listed on page 5-5.
Troubleshooting Reference Table
Applicable Parts Example Print
Engine Control
Board, PL13.0.20
Fuser, PL11.018
Troubleshooting Procedure Table
Step Actions and Questions
1 Check the media.
Is the paper damp or the
incorrect media for the
printer?
2 Inspect the Fuser. Are the
green fuser separator
levers in the correct
position?
3 Replace the following
units, listed in order, until
problem is eliminated:
Engine Control Board
(page 8-59),
Fuser (page 8-9).
Chrysanthemum x morifolium
Incomplete Transfer
Yes No
Replace with paper Go to step 2.
that meets the
specifications for the
printer. If the
problem persists, go
to step 2.
Go to step 3. Close the levers. If the
problem persists, go
to step 3.
Phaser 6121MFP Service Manual
Residual Image/Ghosting